| Problem |
Possible Causes |
Solution |
| Beverage/wine fridge does not operate. |
- The unit may be plugged in using a different voltage.
- The circuit breaker may be tripped or there is a blown fuse.
|
- Check if the voltage is wrong.
- Reset the circuit breaker or check for a broken fuse.
|
| Beverage/wine fridge is not cold enough. |
- The external environment may require a higher setting.
- The door may be opened too frequently.
- The door is not closed completely.
- The door seal does not seal properly.
- The front grille is obstructed.
|
- Lower the temperature of the fridge.
- Open the door less frequently.
- Make sure the door is closed securely.
- Replace the seal on the door. Some Replacements can be acquired from the manufacturer.
- Make sure nothing is blocking the front grille.
|
| The light does not work. |
- There may be a problem with the display board.
|
|
| The fridge vibrates while operating. |
- The unit is not sitting on a level floor, or the unit's feet are not correctly installed.
|
- Make sure the unit's feet are in the proper position and tightened securely.
|
| The fridge produces a lot of noise. |
- The unit is not leveled.
- The fan may be obstructed.
|
- Make sure the unit's feet are in the proper position and tightened securely.
- Check the fan to make sure there is no debris or obstruction. If not, contact the manufacturer.
|
| The door will not close properly. |
- The unit is not leveled.
- The door is not properly installed.
- The seal is weak.
- The shelves are out of position.
|
- Make sure the unit's feet are in the proper position and tightened securely.
- Check the door hinges to make sure they are properly installed.
- Replace the seal on the door. Some replacements can be acquired from the manufacturer.
- Make sure the shelves slide all the way into the unit.
|
| The LED display does not work. |
- There may be a problem with the main control board.
- There is a problem with the plug.
|
- Contact TCL Support.
- Contact TCL Support.
|
| There is an LED display error, or the LED displays "LO" |
- The cooling kit is no longer working properly.
- The PC Board is faulty.
|
- Contact TCL Support.
- Contact TCL Support.
|
| The buttons do not function. |
- The temperature control panel may be damaged.
|
|
Note: Chat agents are live, ready to assist, M-F, from 9am to 6pm Pacific.
